What does a roof-area solar estimate actually tell you?

This tool calculates the footprint of a simple rectangular roof, removes an illustrative perimeter strip and additional excluded area, then applies your chosen panel-coverage percentage and module power-density assumption. It estimates a theoretical module nameplate capacity in kWp. It does not test whether the building can carry it or whether the electricity network will accept it.

Why roof plan area is not the usable PV installation area

Existing rooflights, rooftop air handling units, drains, access routes, parapets, shading and edge-zone design requirements can leave less space than a drawing suggests. Flat-roof tilted rows may need separation to avoid self-shading. A standing-seam metal roof needs compatible seam clamps and structural load transfer. A fragile or suspected asbestos roof requires specialist assessment before work is proposed.

Is a 100 kWp rooftop estimate the same as a 100 kVA connection?

No. kWp describes the modules' peak DC nameplate rating, whereas inverter kW/kVA and export conditions govern other electrical design and connection questions. ESB Networks distinguishes micro-generation, mini-generation and small-scale generation: confirm the correct process for your specific inverter and premises.

What would a qualified structural engineer actually check?

Expect a review of roof and support details, roof covering and fastener condition, relevant dead and imposed loads, local wind uplift and load paths into the structure. A drawing or photograph may help locate features but cannot alone certify the construction or the mounting design.

Important: indicative geometry is not structural sign-off.

Don't use these values as panel procurement quantities, wind calculations, engineering certificates, planning setbacks or an SEAI grant application. Qualified engineers and installers must determine the actual design.

Related answers

Read the roof-suitability engineering Q&A, the Irish grid connection questions, and the fire, maintenance and roof-access guide. Then use the commercial solar quote brief builder to prepare questions for a surveyor or installer.

Where do the safety and connection requirements come from?

The Health and Safety Authority has guidance on fragile commercial roofs; ESB Networks publishes generation connection categories, and the Government of Ireland explains rooftop solar planning exemptions. These are separate from any geometric panel-fit estimate.