Important

Grant-eligible PV system size and permission to connect an inverter to the electricity network are separate decisions. This guide covers decision-making questions only; obtain project-specific engineering, electrical and safety advice and confirm Irish law and SEAI conditions independently.

Is a three-phase electricity connection enough for commercial solar panels?

Not by itself. Three-phase supply is common at commercial premises, but the proposed generator must still satisfy ESB Networks' connection requirements. Existing maximum import capacity, inverter output, network capacity and any export arrangement all matter.

What should you check?

A large factory's electricity use does not automatically mean the local network can accept unrestricted solar export. ESB Networks may assess connection details and identify any required network works.

A quotation should state the proposed AC inverter capacity and generation connection route separately from the solar panels' DC rated capacity in kWp.

The installer and registered electrical contractor should review the existing switchboard, earthing, protection, metering and relevant Safe Electric requirements.

Ask the installer: What is the site's connection category, what AC inverter output is proposed, and has ESB Networks confirmed the route and conditions?

What's the difference between NC6, NC7 and NC8 for Irish solar PV?

They relate to different ESB Networks generator-connection categories. NC6 covers qualifying micro-generation, NC7 covers mini-generation, and NC8 is used for specified small-scale generation. The correct category depends on connection and inverter parameters, not merely the number of panels.

What should you check?

ESB Networks describes micro-generation limits of up to approximately 6 kVA on single-phase or 11 kVA on three-phase supply. Mini-generation extends to approximately 17 kVA single-phase or 50 kVA three-phase.

Its small-scale generation category covers inverter-connected systems above the three-phase mini-generation threshold and up to 200 kVA. Larger projects use different connection processes.

These are indicative descriptions of the official categories, not a substitute for the actual application forms or current requirements. The installer should confirm which route applies to the exact inverter and property.

Ask the installer: Which ESB Networks category and form will be used, who applies, and are application fees or network works included in my quote?

Can a commercial solar system be designed not to export electricity?

Potentially, yes. ESB Networks provides a route for parallel non-exporting generators, but a zero-export design still requires suitable protection, controls and compliance with the applicable connection process.

What should you check?

An export-limiting controller may adjust PV inverter output when the building cannot use all generation. It does not mean there is unlimited permission to connect any inverter size.

A zero-export or restricted-export proposal can affect the financial case: electricity that cannot be consumed or exported may be curtailed, reducing the annual benefit.

Ask what equipment enforces the limit, how it is tested, and whether the system will shut down or reduce output if the export-control equipment fails.

Ask the installer: What export limit is proposed or approved, how will it be enforced, and is curtailed generation included in the savings forecast?

Will my factory's solar panels keep the power on during an ESB Networks outage?

A standard grid-connected PV installation should not be treated as backup power. Grid-tied inverters normally disconnect from the electricity network during an outage for safety. Backup operation requires a specifically designed and approved arrangement.

What should you check?

Some systems combine PV, batteries and changeover or islanding equipment, but the fact that a business owns a solar array does not mean it can power machinery when the public network is down.

Any backup installation must prevent unsafe energising of the public network and be designed for the actual loads that need support.

For critical operations such as cold storage, consult a competent electrical designer and consider the broader emergency-power plan rather than using a simple solar savings calculator as resilience advice.

Ask the installer: Can this proposal truly operate in island mode during an outage, what loads would remain supplied, and what isolation equipment and approvals are needed?

Is a 100 kWp solar array the same as a 100 kVA grid connection?

No. kWp describes the solar modules' nominal DC peak power under standard test conditions, while kVA describes apparent electrical power, often relevant to AC inverter output and grid-connection classification. They cannot be used interchangeably.

What should you check?

A commercial PV design might use panels whose combined DC capacity differs from its inverter's rated AC output. The ratio is a design decision involving weather, economics and electrical limits.

The grid application should use the values and definitions required by ESB Networks. A grant estimate based on qualifying panel capacity should not be assumed to establish electrical connection permission.

Ask for a one-line diagram and an equipment schedule that distinguishes PV array kWp, inverter kW/kVA, connection limits and any export-control settings.

Ask the installer: Show me the DC array size, inverter AC rating and proposed connection/export limits as separate figures.
How these answers were researched

Research checked 17 November 2026. Themes were drawn from UK commercial rooftop solar guidance and US Department of Energy materials, then adapted to Ireland using ESB Networks, HSA, SEAI and Irish government guidance. Foreign standards, permissions and safety distances are not presented as legally applicable in Ireland. These are editorially researched questions, not verified keyword search-volume figures or engineering approvals.

Questions to take to your next solar meeting

Start by asking for the site survey, design assumptions and connection route. Then compare supplier quotes on system size, works included, annual generation, maintenance and realistic self-consumption. The solar installer quotation brief builder produces a checklist you can copy without giving us your contact information.