What is the key decision for a cold-storage facility?

A facility with reliable daytime cooling demand may use much of its solar output directly, but night demand remains dependent on other supply. A credible proposal should show hourly or half-hourly consumption alongside PV generation and avoid treating high annual kWh use as proof of a short payback.

Does 24-hour refrigeration make solar attractive for cold stores?

A credible savings estimate should begin with electricity usage records and the type of equipment operating while solar power is available. Annual consumption on its own cannot tell you what fraction of a proposed system's output will be consumed on site.

  • Refrigeration compressors, fans, defrost cycles and associated warehouse equipment can create recurring electrical demand, including during daylight when solar production is available.
  • A facility may have strong summer daytime loads when solar generation is also higher, but this relationship must be tested against site-meter records rather than assumed.
  • Night-time refrigeration continues when a standard PV system is not generating. A solar array without storage cannot directly supply those hours.
  • A chilled distribution centre differs from a static freezer store: door opening, vehicle movements, dispatch and seasonal throughput can alter its load profile.

Site checks before pricing a cold-storage facility solar installation

Commercial PV design involves more than picking a panel count. The suitability of the building, available roof space, electrical connections and safety requirements can change both capacity and installed costs.

  • Request at least representative interval-meter data covering high and low throughput periods.
  • Separate chilling, freezing, lighting, conveyors and charging loads where practical.
  • Assess roof structure, insulation integrity and the impact of roof penetrations on building performance.
  • Check electrical switchgear, PV connection sizing and operational downtime during commissioning.
  • Treat batteries as a separate cost and energy model; do not assume battery capacity or funding is included in PV grants.
  • Stress-test financial forecasts using lower import tariffs, output variation and changes in cold-store occupancy.

SEAI grants for cold storage in Ireland

A qualifying non-domestic refrigerated facility may be eligible for SEAI's solar PV grant, subject to installed capacity, application timing, eligible works and cost caps. Batteries, thermal storage or refrigeration efficiency upgrades must be assessed under their own funding and commercial rules, not automatically counted as PV-eligible costs.

Under the enhanced 2026–2027 NDMG terms, the grant depends on the stepped capacity schedule and is capped at 45% of eligible invoiced solar PV costs. New applications in the enhanced window must meet all scheme conditions, and work must not begin before receipt of the grant offer. The highest published grant is not a typical project award. Review the current SEAI grant guide and verify directly with SEAI.

Questions to ask installers about a cold-storage facility project

  1. What proportion of annual PV output can refrigeration use directly during daylight?
  2. Which site data and seasonal temperatures drive the consumption forecast?
  3. Does the roof mounting specification protect the cold-room envelope?
  4. Are switchgear and network connection adjustments included in the price?
  5. What operational interruptions are required for installation and commissioning?

Use the free solar PV quotation brief builder to request a consistent scope. A good installer should explain why they recommend a particular system size and show how anticipated solar output compares with actual business demand.

How should you estimate payback for cold storage?

Start with the eligible PV cost, reduce it by any indicative grant and work out estimated yearly value from on-site generation and exports, less maintenance. The resulting simple payback is a rough decision aid and should be stress-tested against changing tariffs, roof output and self-consumption.

Try your own figures in the commercial solar ROI calculator, or see a full 30 kWp worked example. For a major project, an engineering design and detailed financial appraisal are preferable to a generic online estimate. For site constraints, read our commercial roof suitability questions and Irish grid-connection answers.

Method: this is a planning guide, not a case study of a named cold-storage facility. It makes no claim about average installation prices, verified savings or suitability of any specific property. SEAI scheme references are linked to the official source.