Solar for Business, Industry and Agriculture

AGRI SOLAR • DAIRY & MILK COOLING

Dairy Farm Solar Grants Ireland: Milking Parlour PV & Payback

A dairy farm can have a high annual electricity bill and still use relatively little of its solar output at certain hours. Morning and evening milking, bulk tank cooling and water heating are not the same as a steady midday factory load. Start with your parlour's actual electricity profile before choosing panel capacity.

How do milking times and tank cooling affect solar use?

  • Milking vacuum pumps, milk transfer pumps and wash systems may run early in the morning or late in the evening. Check their actual timing against solar generation rather than applying a single annual average.
  • Bulk milk refrigeration can carry on after milking. A correctly modelled cooling load may improve self-consumption, especially during spring and summer, but it depends on equipment duty cycles and temperature.
  • Hot-water preparation, plate cooling, compressors, slurry handling and borehole pumping may create adjustable daytime electrical loads. Don't assume all thermal energy is electrical.
  • Seasonal milk production matters: compare the months when the herd is actively milked with the months when PV output is strongest. A year-round estimate should account for quiet periods.
  • If a farmhouse, parlour and sheds use one MPRN, obtain separate farm-use figures where needed for TAMS; meter arrangement can also affect what is actually offset.

TAMS 3 or SEAI for a dairy farm expansion?

The TAMS 3 Solar Capital Investment Scheme has a 60% approved eligible expenditure rate, a €90,000 investment ceiling and a 62 kWp PV limit, subject also to prior eligible farm electricity consumption and scheme ranking. A planned robotic milking unit cannot necessarily use future demand to justify a larger TAMS-supported size immediately.

SEAI's enhanced Non-Domestic Microgen Grant uses a different grant-band calculation for qualifying installations. It can be worth investigating if planned expansion changes the ideal PV size, but neither the support amount nor approval is guaranteed. Check the status of any existing TAMS application before starting works.

For an expansion, ask for two explicit investment cases: the existing parlour and the proposed future operating pattern. Run both through the farm calculator with the same quote basis, then obtain proper engineering and grant advice.

Our free farm solar calculator shows the TAMS and SEAI funding screens side by side using your figures, with a separate calculation of electricity savings. Neither is a grant application or guaranteed offer.

Dairy shed roof and electrical checks

  • A competent engineer should review loading, corrosion, roof covering condition, wind uplift, safe access and whether the mounting work affects existing warranties.
  • Check the age and electrical suitability of parlour distribution boards, protection equipment and any generator changeover arrangement. Ordinary grid-tied PV is not backup power during an outage.
  • Confirm the appropriate ESB Networks connection application using inverter export capacity. An export restriction may require curtailment and materially change income.
  • If panels are proposed near livestock, plan construction access, temporary barriers, routing and electrical isolation around day-to-day farm safety.

Questions to ask every installer

  1. How much generated PV will the parlour and bulk tank use during each season, based on actual meter data?
  2. What happens to the estimate when the herd size changes or robotic milking begins?
  3. Which part of the quoted works is eligible for TAMS or SEAI, and who handles the paperwork?
  4. Who is responsible for roof engineering sign-off and any required structural upgrades?
  5. How quickly can an inverter or monitoring problem be attended to during milking season?

Frequently asked questions

Can I get grant aid for a new milking parlour roof?

Potentially, but roof suitability and the selected scheme must be established separately. A new building does not automatically make its PV eligible; check TAMS approvals, SEAI premises criteria and grant commencement rules.

Will solar cover early-morning milking?

It may cover only part of it. PV output depends on daylight, season and orientation. Morning demand before sunrise still draws electricity from the grid unless a suitable storage or other arrangement is present.

Should I include battery storage?

Model a battery separately using hourly loads, installed battery cost, cycle life and the particular grant rules. A higher self-consumption percentage alone does not prove battery payback.

PLAN YOUR NEXT STEP

Understand the numbers before giving a supplier your details

Use the independent estimate, compare financing and scope, and prepare a realistic quote brief. Then decide whether you want us to research potential installers.

Use the farm grant calculator ↗

Official references: DAFM Solar Capital Investment Scheme and SEAI Non-Domestic Microgen Grant. Independent guidance, reviewed November 2026. A qualified adviser and installer must verify project-specific compliance.